Due to the bulky nature of this item please contact us for shipping estimate
Package Kit Includes:
1 - 30FT WINDJAMMER SERIES 5000 Freestanding Cold Frame x 96'0" long (2880 ft2)
6' bow spacing, 6' sidewall height and 16'0" peak height
3 - runs 1.315" diameter galvanized pipe purlin per structure - 18 gauge
18 - 2 1/4" square galvanized tube ground stakes - 12 gauge
18 - 2" square galvanized tube half bows - 15 gauge
3 - 0.922" round galvanized tubing cross bars, installed every other bow - 18 gauge
Heavy-duty galvanized wind bracing provided for each end of Cold Frame structure
Certified design: This structure represents a non code design with certification un-available.
END WALL FRAMING:
2 - Galvanized steel end wall kits complete with 2" square galv tube uprights, 2" square galv tube horizontal framing members flush mounted, as well as all necessary hardware and fasteners for 30' 0" wide frame with 6' sidewall height.
SIDE WALL FRAMING:
Customer has chosen to incorporate treated lumber as the base board and eave board for this structure.
GPS' quote excludes any and all wood framing. Wood framing to be provided by others
2 - Hardware kits to connect wood eave framing to structure frame. Wood framing to be provided by others.
2. ROOF & SIDEWALL POLYETHYLENE:
1 - roll 40ft. wide x 100ft. long 6mil - 4 year CLEAR poly film sheet (to be used as inside - internal layer for roof) along
with 1 - roll 40ft. wide x 100ft. long 6mil - 4 year CLEAR poly film
sheet (to be used as outside - exterior layer for roof).
1 - air inflation fan assembly complete with fresh air intake kit and variable speed fan control.
ROOF POLY LOCK SYSTEM:
9 - 12ft. Long sections of double track aluminum spring lock base complete with fasteners as required
to secure poly at gable end bows. This assembly also doubles as a flashing for end wall glazing.
16 - 12ft. Long sections of single track aluminum spring lock base complete with fasteners as required
to secure poly along eaveboards.
50 - 6' 8" Long sections of coated spring wire for locking poly film to aluminum base profiles.
3. END WALL COVERING:
885sq. ft. clear 8mm twin wall polycarbonate glazing.
Aluminum extrusions, fasteners and sealing tape as required to secure polycarbonate glazing to end wall framing.
4. SIDE WALL COVERING:
Included with Roof Covering
2 - 72" wide x 96" high 8mm polycarbonate single sliding doors complete with track, 8mm, door rollers, guides, door and door frame. Doors provided as an INTERIOR SLIDING assemblies, glazed with 8mm clear twin wall polycarbonate and include brush assemblies 360° around to help "seal" opening against inclement weather.
6. MECHANICAL VENTILATION: Not Included
7. AIR CIRCULATION: Not Included
8. HEATING: Not Included
9. SHADE FABRIC: Not Included
10. ENVIRONMENTAL CONTROLS: Not Included